02 Jun 2017

Dismounted A-PNT system

Type of document: Contract Notice
Country: United States

Dismounted A-PNT system

Agency:
Department of the Army

Official Address:
6001 COMBAT DRIVE Aberdeen Proving Ground MD 21005-1846

Zip Code:
21005-1846

Contact:
Brian Holman, Contract Specialist, Phone 4438614765, Email Brian.J.Holman2.civ@mail.mil – Jennifer L Mattessino, Contracting Officer, Phone 4438614772, Email jennifer.l.mattessino.civ@mail.mil

Link:

Date Posted:
31/05/2017

Classification:
A

Contract Description:

INTRODUCTION

The Army Contracting Center, Aberdeen Proving Ground, MD is issuing this request for information (RFI) as a means of conducting market research to identify potential sources having an interest in and having industry technologies available to develop an integrated Positioning, Navigation, and Timing (PNT) capability for the Dismounted Soldier that – uses a military global positioning system (GPS) receiver; is able to incorporate M-code technology when available; significantly improves access to GPS signals in all conditions; utilizes non-GPS augmentation to continue GPS-like performance when GPS signals are not available; minimizes size, weight, power, and cost (SWaP-C), ensures that the PNT solution is trustworthy; distributes the generated PNT information to multiple client systems in the dismounted environment; and minimizes integration and logistical costs.

The result of this market research will contribute to determining the method of procurement, if a requirement materializes. Based on the responses to this RFI, this requirement may be set-aside for small businesses (in full or in part) or procured through full and open competition. Multiple awards may be made. All small business set-aside categories will be considered. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding submissions.

DISCLAIMER

THIS IS AN RFI ONLY. THIS REQUEST DOES NOT CONSTITUTE A SOLICITATION OR A REQUEST FOR PROPOSAL (RFP) AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY.

PROGRAM BACKGROUND

Assured PNT (A-PNT) is a critical Army capability. The Army has highlighted current and projected shortfalls in the ability to assure unhindered access to trusted PNT. These shortfalls directly affect the ability of the Army to conduct united land operations. The inability of Army forces to access PNT degrades the ability to execute critical tasks. PNT information enables Commanders to position forces and navigate across the operational environment. Communication networks, fires, and mission command systems require operational PNT which contribute to successful joint operations in the land, air, maritime, space, and cyberspace domains.

The A-PNT program will employ a system of systems (SoS) architecture that focuses on conservation of SWAP-C for dismounted and mounted platforms, the ability to protect access to PNT, platform PNT distribution efficiency, and the ability to manage PNT modernization at the platform level. The program strategy is based on the development of interdependent systems that provide the required capability including: a mounted A-PNT system that supports mounted platform-based clients; a dismounted A-PNT system that supports soldier-based clients; an anti-jam antenna system that provides point protection for mounted platforms; and pseudolites that provide area protection for mounted and dismounted A-PNT systems.

This RFI has been released to gather information on industry’s ability to support the dismounted A-PNT system only.

EMERGING REQUIREMENTS

The U.S. Army is interested in understanding the available capabilities of industry to develop an integrated PNT capability for the Dismounted Soldier that – uses a military GPS receiver; is able to incorporate M-code technology when available; utilizes non-GPS augmentation to continue GPS like performance when GPS signals are not available; minimizes SWaP-C; ensures that PNT information is trustworthy; distributes the generated PNT information to multiple client systems (approximately three (3) to six (6) clients) in the dismounted environment; and minimizes integration and logistical costs.

The dismounted A-PNT system will be employed worldwide in hostile environments, in a variety of terrain and climatic conditions to ensure the ability of Army forces to obtain and trust PNT while operating in conditions that degrade or deny access to GPS signals. This includes operating in dense vegetation, built-up urban and mountainous terrain, and in the presence of enemy jamming and spoofing of the GPS signals. The system is envisioned to use GPS signals and achieve additional integrity from the fusion of multiple non-GPS sensors (non-GPS augmentation) to provide trusted PNT data, allowing the Soldier to operate in GPS degraded or denied environments. The dismounted A-PNT system will also include receiver software capable of acquiring Pseudolite signals that provide additional protection for military GPS in denied environments, as well as, paces the threat by including a migration path to military code (M-code) and other future technologies. Furthermore, the dismounted A-PNT system will optimize its power by leveraging a shared conformal wearable battery when employed with the Army’s Nett Warrior system.

In addition to the capability questions listed below, a classified supplement to this RFI contains emerging requirements and additional questions. Instructions for submitting responses to the capability questions listed below and for requesting the classified supplement are contained in the section on submission details. 

SPECIAL REQUIREMENTS

Any resulting contract is anticipated to have performance requirements at the Secret security classification level. Interested sources shall be approved by the Defense Security Service for safeguarding and storage of Department of Defense (DoD) Secret classified information no later than the RFP release. Any resulting contract shall be compliant with the specialty metals restriction of the Berry Amendment (10 U.S.C. 2533a and 2533b) in accordance with Defense Federal Acquisition Regulation Supplement clauses 252.225-7008 and 252.225-7009.

ELIGIBILITY

The applicable NAICS code for this requirement is 334220 with a small business size standard of 1,250 employees. The Product Service Code is AC63.

SUBMISSION DETAILS

Interested sources may only provide one (1) submission per CAGE code. Interested sources may submit multiple capabilities within one (1) submission. Additional capabilities must be provided within the confines of the page limits provided below. If a company has different business sectors which hold different CAGE codes, each sector can provide a submission. In addition, each CAGE code must provide separate facility clearance documentation. No phone or email solicitations with regard to the status of any further/potential RFP will be accepted prior to its release.

Capability Questions: Responses to the capability questions listed below should be submitted electronically to the Contracting Officer, Mrs. Jennifer Mattessino, Jennifer.L.Mattessino.civ@mail.mil, and Contract Specialist, Mr. Brian Holman, Brian.J.Holman2.civ@mail.mil, no later than 4:00PM eastern standard time June 30, 2017 and reference this solicitation number in the subject line of the electronic-mail.

Responses to the capability questions listed below shall not exceed 20 pages and shall be sectioned as described below. Pages containing text shall be typewritten on standard letter 8.5″x11″ size paper. Responses to each section shall be sequentially numbered to correspond with the questions. Paragraphs shall be separated by at least one (1) blank line. Drawings or other graphics shall be reduced only to the extent that legibility is not lost. Each page shall be single spaced with a minimum of a 12-point Times New Roman font and no less than one (1) inch margins/borders. Any table or graphic shall utilize a minimum of 10-point Times New Roman font and may be landscape and will be included in the maximum page count.

All information and materials that are marked or designated as corporate or proprietary will be fully protected from any release outside the Government. Information and materials submitted in response to this request will not be returned.

Administrative Information:
   a. Company Name
   b. Mailing Address and Website
   c. CAGE Code
   d. For NAICS 334220 (size standard of 1250 employees), indicate your business size including all subcategories of small business that are applicable (large business, small business, small-disadvantaged, 8(a), woman-owned, veteran-owned, service disabled veteran-owned, HUBZone)
   e. DUNS number
   f. Location of facility(s)
   g. Is your company foreign owned, either directly or indirectly? If so, what is the country of origin and is the company fully or partially owned?
   h. Person Responding to RFI:
      1. Name
      2. Title
      3. Company Responsibility/Position
      4. Telephone Number
      5. Email Address 

Capability Questions

Performance:
Specific performance questions regarding the dismounted A-PNT system are contained in the classified supplement.

General:

1. Do you have a dismounted A-PNT system in development or in production?

2. Describe the system (including dimensions and weight). Provide the current Technology Readiness Level (TRL) of the system and cite the source of the TRL determination. Also, describe your company’s logistical support for the device and any associated software or other product data rights.

3. If the dismounted A-PNT system is production-ready, please provide associated range quantities and associated costs of normal production units.

SWaP:

4. How would you minimize the SWaP for a dismounted PNT system to ensure the GPS/non-GPS/internal antenna package meets a maximum volume of 18 cubic inches, with no one side greater than four (4) inches and a maximum weight of 12 ounces as a Line Replaceable Unit and 16 ounces with batteries?

5. How would you minimize or manage power usage when connected to the Nett Warrior conformal wearable battery via the Integrated Soldier Power and Data System hub and when limited to two (2) watts of continuous power usage?

6. In the absence of a Nett Warrior system, how would you meet an 18-hour continuous mission usage requirement?

Receiver Technology:

7. Given the requirement for GPS receiver technology to be developed in “Trusted Foundries”, do you have any concerns regarding M-code card availability?

8. What is your timeline (or a receiver vendor timeline) to develop and certify a small form factor (Miniature Serial Interface) M-code receiver? Will that receiver be capable of accepting pseudolite signals?

Interface/Interoperability:

9. How would you leverage a common Application Program Interface to allow application(s) to be developed for plug-and-play integration with the Nett Warrior End User Device – smartphone, Rifleman Radio, and other dismounted Army devices while remaining compliant with Army directed mobile/handheld computing environment standards?

Production:

10. Describe your manufacturing and production capabilities and recent experience with building, testing and producing similar or like devices. Will you produce the device in-house or sub-contract to a production facility? Describe your ability to ramp up to a full rate production scenario and your production surge capabilities?

Schedule:

11. What is a realistic timeframe to have engineering development models (EDMs) available after contract award to support testing? How many EDMs would you expect to be able to build monthly to support testing?

12. Do you foresee any potential schedule delays to build a dismounted device during an engineering and manufacturing development or production and deployment phases due to the scarcity, health of the industrial base or long lead nature of components/subcomponents? If so, what are those components and potential impacts?

Testing:

13. Describe your experience and capabilities for performing system-level testing of end-items of equivalent capability and complexity as the dismounted A-PNT system.

Logistics:

14. Can a dismounted A-PNT system be cost effectively produced so it could potentially be disposable (expect for the GPS receiver)?

15. Would you consider offering build-to-print data rights that would enable competitive production? Would you consider offering government-purpose rights to allow transition to government organic repair and software sustainment? If not, what data rights would you be willing to consider? How would you suggest minimizing logistics costs and maximizing competition during full rate production?

16. Identify your company’s experience in developing Army training, operator, and maintainer technical manuals.

17. Identify your company’s experience with incorporating reliability, availability, and maintainability considerations into military equipment designs.

18. Do you expect the product to require preventative maintenance? If so, please describe.

19. What is your expected sparing strategy? Is there a model used to determine optimal sparing?

20. Do you have a formal surveillance program? Is yes, please describe.

21. Does your company have experience in performance based logistics and/or depot partnership programs? If yes, approximately on how many products?

Cost:

22. What are your ROM prototype unit costs at a quantity of 1,000 dismounted A-PNT systems (without M-code)?

23. What is the step-down factor from prototype to procurement at a quantity of 1,000?

24. Identify any Government furnished equipment included in the prototype and production cost estimates above. 

Instructions for Requesting the Classified Supplement: Interested sources, with the appropriate facility and personnel security clearances, can request a copy of the classified supplement to this RFI. To request a copy of the classified supplement, the following information must be submitted electronically to the Contracting Officer, Mrs. Jennifer Mattessino, Jennifer.L.Mattessino.civ@mail.mil, and Contract Specialist, Mr. Brian Holman, Brian.J.Holman2.civ@mail.mil, no later than June 7, 2017 and reference the solicitation number in the subject line of the e-mail.

DO NOT SUBMIT CLASSIFIED MATERIAL WITH THE INITIAL EMAIL REQUEST FOR THE CLASSIFIED SUPPLMENT:

Administrative Information:
   a. Company Name
   b. Mailing Address and Website
   c. CAGE Code
   d. For NAICS 334220 (size standard of 1250 employees), indicate your business size including all subcategories of small business that are applicable (large business, small business, small-disadvantaged, 8(a), woman-owned, veteran-owned, service disabled veteran-owned, HUBZone)
   e. DUNS number
   f. Location of facility(s)
   g. Is your company foreign owned, either directly or indirectly? If so, what is the country of origin and is the company fully or partially owned?
   h. Objective evidence of being a DoD contractor
   i. Preference to receive a classified hard copy or classified compact disc

Person Responding to RFI:
   a. Name
   b. Title
   c. Company Responsibility/Position
   d. Telephone Number
   e. Email Address

Facility Security:
   a. Facility Clearance Level
   b. Facility Security Officer name, phone number, email address
   c. SMO Code
   d. Vendor’s ability to store and process classified information
   e. Classified mailing address for inner envelope
   f. Name of individual on inner envelope (also see Personnel Clearance (PCL) requirement below)
   g. Address for the outer mailing envelope

PCLs for name on inner package:
   a. Preferred method is Joint Personnel Adjudication System (JPAS). For each JPAS field, use the instructions below:
      1. SMO Code: W4GVAA-52
      2. Reason for visit: select “other”
      3. Visit Access: select “SECRET”
      4. First Day of Visit: enter request date
      5. Last Day of Visit: enter request date plus 90 days
      6. POC: enter this solicitation number
      7. POC Phone: enter “443-395-1047”

   b. If JPAS is unavailable, the alternative method is Visit Access Request (VAR)
      1. VAR shall be used to verify clearance for personnel receiving classified information.
      2. VAR shall be submitted on the organization/company letterhead
      3. Personnel cannot verify their own security clearance or approve their own visit request.
      4. VAR shall be e-mailed to Program Manager, Positioning, Navigation, and Timing (PM PNT) Security at usarmy.apg.sosei.mbx.pm-pnt-security@mail.mil
      5. The following information must be included in the request:
         a. Name (full name – Last, First, MI)
         b. Grade/Rank/Position
         c. Social Security Number
         d. Date and Place of Birth
         e. Citizenship
         f. Date of request
         g. Duration = 90 days
         h. Purpose of Visit: list this solicitation number
         i. Level of Clearance and Issuing Agency (required for non-DoD agencies only – if no clearance state NONE)
         j. Date Security Clearance Granted (required only if cleared)
         k. Type of Security Investigation (required only if cleared)
         l. Date Investigation Completed (required only if cleared)
         m. Company name
         n. Company Address
         o. Company Telephone Number
         p. Signature Block and signature of Security Officer.

Upon receipt of this information, approved sources will receive a package delivered by the United States Postal Service containing the classified supplement on a disc or hard copy (depending on choice from above). Responses to the questions in classified supplement shall be entered on the respective discs or hard copy and returned to the PM PNT security office no later than July 14, 2017. The classified inner address and unclassified outer addresses for PM PNT security will be provided with the package.

The response to the classified supplement shall not exceed 10 pages. The response shall be sectioned as described below. Pages containing text shall be typewritten, on standard letter 8.5″x11″ size paper. The response shall be sequentially numbered to correspond with the questions. Paragraphs shall be separated by at least one (1) blank line. Drawings or other graphics shall be reduced only to the extent legibility is not lost. Each page shall be single spaced with a minimum of 12-point Times New Roman font and no less than one (1) inch margins/borders. Any table or graphic shall utilize a minimum of 10-point Times New Roman font and may be landscape and will be included in the maximum page count.

All information and materials that are marked or designated as corporate or proprietary will be fully protected from any release outside the Government. Information and materials submitted in response to this request will not be returned.

 

Response Date:
063017

Sol Number:
W56KGY-17-R-DISMOUNTED